Refrigeration Vibration Absorber

1.OEM is available; 2.Brazed welded; 3.Factory sales directly; 4.Max. working pressure: 3.5MPa 5.Used for Refrigeration ZR Vibration Absorber

1. The vibration absorber are designed to be installed in the suction and exhaust pipes of air conditioning and refrigeration

    systems to reduce vibration in the transmission of compressor-induced vibration through system piping;

2. The vibration absorber is made of deep pitch corrugated tubing for increasing tube flexibility and vibration absorption,

    covered by high tensile stainless steel mesh for superior strength. The corrugated tubing and stainless steel mesh

    reinforced by ferrules at each end, and the copper tube connected to internal thread is welded by high temperature 

    brazed alloys.

 

Features:

1. Hose and copper tube are brazed welded.;

2. All parts have been cleaned and dehydrated for refrigeration service;

3. Each product is vacuumized and tested by stress tests, and sealed in plastic film;

4. OEM is available;

5. Sizes are available both in metric and inch units;

6. A completed physical and chemical analysis of all basic components

 

Design Functions:

1. Pipe joints;

2. Stainless steel metal ferrule;

3. Stainless steel Soft tube;

4. Stainless steel metal coil;

 

Specification:

 

Type	ODF Connection	Dimensions(in)					Maximum Working Pressure(Mpa)	Busting pressure(Mpa)
		A (1D)	B  (±1/8)	C      (±1/8)	D    (±1/4)	E        (±1/16)
ZR-3	3/8	3/8	13/16	6-15/16	8-9/16	1/2	3.5	17.5
ZR-4	1/2	1/2	7/8	7-1/14	9	1/2	3.5	17.5
ZR-5	5/8	5/8	15/16	8	9-7/8	11/16	3.5	17.5
ZR-6	3/4	3/4	1-1/14	8-1/16	10-9/16	11/16	3.5	17.5
ZR-7	7/8	7/8	1-7/16	9-1/8	12	13/16	3.5	17.5
ZR-9	1-1/8	1-1/8	1-13/16	9-7/16	13-1/16	13/16	3.5	17.5
ZR-11	1-3/8	1-3/8	2	11-1/2	15-9/16	7/8	3.5	17.5
ZR-13	1-5/8	1-5/8	2-1/4	12-3/8	16-7/8	15/16	3.5	17.5
ZR-17	2-1/8	2-1/8	2-3/4	15-3/16	20-5/8	15/16	3.0	15.0

 

Refrigeration Vibration Absorber